Best Ways for Solar Panel Mounting

Solar panel is actually used to generate energy. The greatest problem of this century is no doubt the energy crisis so the need of such alternatives automatically increases rapidly. Some types of solar panel mounting systems for homes specifically, are discussed here. They are also known as residential mounting systems.

Checking Your Roof

Before starting off with these systems and getting them installed, you must check the undercarriage of your roof. This can be done by any qualified structural engineer so do get their services prior to the installment. It is not required by every country to have an engineer’s stamp on the building but for a Vibrant, a structural engineer is must.

Building Codes

UBC mandates the techniques and the building materials. It actually stands for universal building code. Codes are given after every few years. When any city or a country decides for adopting a new UBC version, the efficiency varies.

Local buildings code usually has some variations from the standard techniques. People must also consider the fire department and electrical code regulations before the installment.

1. Flush Mount

Flush mount is a standard mounting system. The benefit is that a less space is taken by them and it has the lowest visual impact. If you want to install it, your roof will be penetrated into the joists by using a 5/8” long bolt. A standard roofing sealant is also used. There is a metal of L-shaped foot which is fixed by the bolt. Vents, pipes, and other structures are also used accordingly.

2. Tilt Mount

Metal legs are added to the flush mounting for tilting the tops of the panels. It is done in order to gain a better angle towards the southern horizon. This increases the cost in labor and material but you have a benefit that the output is better. The sun hits the mount at an appropriate angle. Thus the maximum solar energy can be used and utilized.

3. Fin Mount

It is specifically for the slopes which face east or west. So this mount is fixed to get a better angle to the south. Legs of varying lengths are installed and this system is comparatively higher than the other ones.

4. Shadows

There are more than one row in tilt and fin mount system. A separate shadow is cast by each row. That’s why each row must be placed at a reasonable distance so the shadow couldn’t be cast by the southern row on the next one. The slope of the roof and the tilt of the planes determine the distance of the rows.

5. Side Mounts

Cantilevered window can be mounted to almost every building side. But prior to the installment the structural engineer must check the condition of the wall, design process and other factors.

6. Ground Mounts

They normally require digging holes for pouring concrete in them. It is done to secure the poles, rack bases etc.

7. Parking Canopies

It is better to have a covered parking area. So install the solar panels and get the shade.