Pages

Saturday, October 8, 2011

Making a Solar AAA Battery Charger: Step By Step Guide



Solar cells or photovoltaic semiconductors are the most easy and cheap way to charge small batteries. Making a solar battery charger is inexpensive and provides savings in the future from the cost of new batteries.


Here are some simple steps for building a solar charger:

Step 1


For charging a AAA battery it’s necessary that solar panel must generate more than 1.5 volts in direct sunlight. Smaller solar panels can not do this on their own, for they should be soldered in a series to boost the output voltage. For connecting those in series wire the positive lead of the first panel to the negative lead of the second panel. Continue this procedure until the output voltage gets higher enough.

Step 2


Last positive lead must be connected one side of the diode and other side will be wired to the positive terminal of the battery. The small plastic battery holder makes it easy to change the batteries out once charged. Remaining positive and negative leads will be solder to the terminals on the holder. When it will be completed then the circuit will be having chained solar panels to the battery holder, if more than one panel is required.

Step 3


Build the entire solar array on the wood board to give it a solid surface. For fixing each panel on the wood apply a small amount of glue at back of each panel and while affixing them on wood don’t press them hard because solar panels are glass.

Step 4


On final step place the battery in the holder and put the entire apparatus into direct sunlight. One battery charging time will be proportional to the output voltage. For instance is solar panel array puts out 3 volts, then the battery may charge to 95% in eight hours and if out is doubled then it might take only 3 to 4 hours.

Tips and Precautions


While using electricity and soldering wear proper protection equipment and you must be having proper ventilation while soldering.

Never try to connect solar panels in “parallel”, or positive-to-positive.

1 comments: